User's Manual

(3) Play Option Panel
Channel selection: Activated channels are shown in red, and inactivated channels are seen in
green. ‘All’ means that all the 4 channels are selected.
Event selection: This is to decide to event type to search. CamViewer II search and display
images that are recorded under designated events.
- All: Selects all recorded images to replay.
- MD: Selects the images that are recorded with ‘motion detection’ function.
- S1 & S2: Selects the images that are recorded when sensors detect events.
(4) Play Speed
This controls play speed (0.5x/1x/2x/4x/All frame) of the drag Slide. If the user’s Network speed is slow,
not all of the recorded frames can be replayed at the speed of 0.5x, 1x, 2x and 4x. In case of slow speed
network, CamViewer II may display images with skipping images to keep up the select speed. The speed
signifies the relation between recording time and displaying time.
- 0.5X: This is to replay recorded image for the double time that is spent when to record images.
- 1X/2X/4X: This is to replay recorded image for original/a half/ a quarter time that is spent to record
images.
- All: Every frame is replayed without skipping any image frame regardless of Network transmission
speed.
For example, if you select ‘2x’ at replaying image recorded for 1 minute, the whole image is replayed for
30 seconds. If Network speed is slow and and CamViewer II can’t keep the speed, it may skip image
frames.
(5) Play Ctrl Panel
If you press the ‘prev/next’ button once, the frame will be replayed. If you press ‘prev/next’ button
continually, images are viewed continuously.
(6) Range Selection
Indicates recording range by 5/10/15/30 minutes/1hour. If 1 frame is recorded for 5 minutes and you select
replaying range as 5 minutes, 1 frame is replayed.