User's Manual

2) Connection
Select Cam: To connect the Cam, select a Cam first by using the ‘Cam Selection’ button. If there are no
selected Cam and you click the ‘Connection’ button, the Cam Selection dialogue will appear. Setting
method is same with ‘Configuration’ page.
Select a Cam by double-clicking or pressing the ‘ OK’ button. After the Cam is selected the Cam will be
indicated at ‘Nick Name’ item. When pressing ‘Connection’ button, you may access the Login menu.
Login: Enter ‘User Name’ and ‘Password’. If ‘Port #’ is configured differently, you can change it
manually. If the selected Cam is registered, you can utilize ‘Save Password’ function. User’s ID that has
accessed it last is indicated in ‘User Name’ of Login menu, and default value of ‘Configuration’ page is
indicated in Port #. If you change Port # in ‘Configuration’ page, click the ‘Cam Selection’ button and
select a camera in ‘Cam explorer’ again.
In this panel, user may change password within 14 English characters or numbers, but administrator
cannot change it in this panel. It is because administrator’s ID is fixed and common user may interrupt the
whole system with using administrator’s ID by stealth.