User's Manual

Setup: After you press the ‘Setup’ button of each channel, you may configure relevant channel schedule.
Time Interval: You can divide a day into 5 sections and configure each section between 0:00 and
24:00 for each channel. (The below 0:00 means 24:00.) If you configure another section except first
configured section, the next section is activated.
Normal Save : This is to designate a recording level of normal situation with three conditions such as
frame rate, image resolution and image quality (compressing rate). The quality level of live image is
also decided here. If the below item ‘Quality box’ is selected, the image is saved as you configure the
recording condition of image in the bottom of this tab, ‘Quality Box’ button.
Event Save : This designates a recording level of event situation with three conditions such as frame
rate, image resolution and image quality (compressing rate). If the below item ‘Quality box’ is
selected, the image is saved as to your configured recording condition of the image in the bottom of
this tab, ‘Quality Box’ button.
Event: This defines recording condition of event situation and decides which device is utilized when
the events occur. You can configure each device at each time section. In other words, if Motion Detect
or Sensor item is selected, it means that the image is recorded on HDD when the device senses the
event situation. When Digital Output is selected with Motion Detect or Sensor item, it means that
external digital device such as an electric light is operated at the same time. Though digital output is
not configured as automatic operation in this menu, you may control it in real-time image viewer
manually.