User's Manual

9) Setting HDD information
Auto Delete: You may delete data by 1000, 2000, 5000, or 10000 frames automatically when the HDD is
full. It is only possible to delete images from the earliest frame recorded. With activating this function,
Cams will keep on recording images by deleting already recorded images. Otherwise the Cam can’t record
images any more when the HDD is full.
If an administrator or user deletes data on HDD manually through ‘Playback’ program while the other use
search on HDD, CamViewer II shows the other user a message of ‘Auto Delete (number)’. Number
signifies deleted image frame number.
HDD Status: The diagram shows HDD status. If the ‘HDD Enable’ is selected, Cam will record images
on its HDD, if not, the Cam will not record nor replay. The default value is configured as ‘Disable’. You
can format HDD with ‘HDD Format’ button. When HDD is formatted, all recorded images
will be deleted.
If administrator formats HDD at ‘Configuration’ program while the other use search on HDD,
CamViewer II shows the other user a message of ‘HDD is to be formatted now by a administrator.
Connection will be closed. Please reconnect later’ and the connection of the other user will be closed.