User's Manual

Port Assignment: This is to configure Playback port and Monitoring port manually.
- Normal: Generally, port 80 or port 8080 is open for ordinary data communication, and port 8839 is
for image transmission. But when a firewall is set, these ports may not be used. In order to solve this
problem, CamViewer II uses port 8105 as playback port and port 8001 as monitoring port for
surveillance. If you press “Advanced” button, administrator may configure the ports number for with
other ports that are available on the Network. The changed value is confirmed after rebooting. If you
press ‘Default’ button, changed value is configured as default value.
When ‘Normal’ is selected after using ‘Firewall’ mode, it is to be configured the ports as follows.
. Select ‘Normal’ button.
. Click ‘Apply’ button.
. Reboot Cam.
. Click ‘Advance’ button and configure ports number.
. Reboot Cam.
- Firewall: If there is a firewall on the network and there is a unique port is available, user may
configure the Monitor and Playback ports as one port. In order to change a port, select “Firewall”,
click the “Advanced” button, and configure a suitable value. The changed value is confirmed after
rebooting.