User's Manual
5-3) Connecting Cam on ADSL Modem
It is possible to manage Cam with ADSL modem instead of dedicated line.
To use Cam with ADSL modem, input on panel of [Ethernet], [xDSL] and [CRS] properly
[Ethernet]
If IP Address, Network Mask, and Gateway Address are same with PC’s ones, you should enter different
values at [Ethernet] panel in order to connect Cam to ADSL normally.
If not, you don’t need to configure [Ethernet] panel. (For more detailed information, please refer to “Help
about CRS” part.)
Uncheck ‘DHCP Enable’.
[xDSL]
Click the ‘xSDL’. Input user ID and password, which are assigned from the Internet Service Provider.
[CRS]
When a Cam is installed under the environment of Cable Modem or ADSL Modem connection, its IP
address changes whenever it reconnects to the Internet Service Provider. In this case users who don’t
know the changed IP address cannot get access to the Cam.
A Cam with dynamic IP should be registered to the CRS server in order to make it easy for users to find
the changed IP address, when they want to access the Cam. Please refer to ‘CRS’.
To use CRS, configure the descriptions below. If you use ADSL modem or Cable modem, you should
configure it as same ways.
n Registration Interval: In order to maintain continuous connectivity, user should reset the
‘Registration Interval’. Dynamic IP addresses are updated to CRS server periodically at time
interval. When configuring ‘Disable’ or without any data transferring from Cam for 2 days, server
may delete about registrations. . Even though you configure‘Disable’, it would be deleted
registrations from CRS in 2 days.
n Registration Server: IP address for CRS, which is managed by ‘Philips’, is ‘210.116.114.37’ and
URL is ‘NetDVR.to’. It needs not to register DNS server when entering IP address. And you must
register DNS server when entering URL. IP address of DNS that is registered as ‘NetDVR.to’ is
‘211.53.133.11’.
n Group ID: Group ID is for discriminating and managing the information of Cam belonging to
group. This is to enter your own group ID. It is recommended unique group ID to avoid other group
ID’s Cam.