User's Manual

4) Setting System information
Initialize FlashInfo: You can reset almost all the settings back to factory default figures but the time and
network configurations will not be reconfigured. The related information with recording and management
settings is mainly initialized.
Time: When you access CamViewer II, the time indicated from this may be different with PC. This shows
the time of the Cam when you access the ‘System information’ tab. ‘Current time’ menu is to
synchronize the time of the Cam and the PC. To synchronize the time, check ‘Current Time’ and press
‘Apply’ button. If you don’t set current time, time of Cam is still maintained.
Reboot Cam: If the Cam has any problem, you can reboot it without adjusting the power supply. This
button works as on/off switch