User's Manual

2) Log–in Screen
Enter ‘User Name’ and ‘Password’. ‘User Name’ is fixed as ‘admin’. If the ‘Save Password’ is checked,
you don’t need to enter the Password whenever you log in. ‘Save Password’ function may only be utilized
if the Cam is registered on the ‘My Cameras’ directory.
To change IP address, enter the new IP address and press ‘Change IP’ button. If the connected Cam
doesn’t have the same local network IP address, administrator cannot access it. In the case, administrator
should change IP address with a local one, and then may access the Cam to configure it.
After keying in password, click the ‘Login’ button. This will allow you to access the configuration page
of CamViewer II. To affirm the changed description, click the ‘Apply’ button certainly.