User's Manual

III. NetServer-6 Installation Summary, Connection & Placing
1. Installation Summary
 Connect Ethernet and Power to NetServer on local network for configuration.
 Install NetServer Setup Program into a PC on local network.
 Assign an IP address to NetServer and configure administrator’ s condition.
 Configure user’ s condition.
 Place NetServer, re-connect power and Ethernet.
2. Connecting
 Connect Ethernet line to the Ethernet port in the rear.
 Connect the power supply.
 Confirm that the LED of the Ethernet port blinks.
IV. Installing NetServer-6 Setup Program
 Insert the NetServer Setup disk.
 Drag the NetServer Setup icon onto the desktop.
 Double -click on the icon.