User's Manual

2. Upgrade firmware with upgrading program
(1) Select NetServer to upgrade by
clicking on IP address or MAC address in
the list.
When an IP address appears in the blanks
of “Selected IP address,” type in the
administrator’ s password in the “Administ
-rator’ s password” blank.
Click “ Start” button.
(2) Click “ Yes” button to confirm upgrading process.
(3) Click ‘ OK’ button to start rebooting process.
(4) If NetServer has a different firmware version,
the program will ask if it should be replaced with a
new one. Confirm by clicking “ Yes.”
(5) T he program will ask to format user file system. To
maintain any changes made to NetServer’ s homepage, click
“No.” To format user file system and reload the default
settings, click “Yes.”
(6) When upgrade is complete, reboot NetServer by
clicking the “Ok” button.
(7) To upgrade other NetServers, repeat the above process. Otherwise, click “Exit.”