User's Manual

Connector Two 10 Based-T Ethernet
(Network, Loop Stackable upto 3 boxes only with 1 IP)
Installation Assign IP address using setup program or ARP/RARP protocols
Protocols supported TCP/IP, HTTP, ARP, RARP, ICMP, DHCP, FTP, SMTP, PPP and PPPoE
S/W Upgrade Flash memory allows central remote software upgrades over network
using FTP or private “WebyeUpgrade” program
Management Configuration is achieved by private setup program and Web server
built in administration page.
4. Mechanical
Dimension H x W x L = 40mm x 220mm x 240mm
Weight 1.25kg (without power supply)
5. Compatible external devices and software
PTZ control RS-232, RS485/RS422
Sensor input 6 auxiliary inputs are supported, made of ‘ Opto coupler’
Opto coupler stands with 3-5V and 10-20mA