User's Manual

Audio Device
This protocol is for NetServer A10, which is an audio transmission device connected to NetServer.
For more detailed information on NetServer A10, please refer to NetServer A10 User’ s Guide.
Manual Setting
If the mechanism doesn’ t use any of
already listed protocols, administrator may
set the protocol manually by selecting
‘ Manual Setting’ and set parameters
through ‘ Control Parameters’ and ‘ PTZ
CMD’ menus. And administrator should
configure their control parameters such as
‘ Baud Rate’ , ‘ Stop Bits’ , ‘ Data Bits’ , and
‘Parity Check’ according to connected
external camera settings. For detailed
information, please refer to following
explanation.