User's Manual

5) How to find a registered NetServer in NetServer Internet homepage
On WebGate Internet homepage (http://www.webgateinc.co.kr), there are menus to find NetServer
that is registered on WRS (NetServer Registration Server).
(1) Sign up membership
To search your NetServer out of a public list or a private list, sign up membership first. You may
sign up on the server through ‘ Membership’ menu.
(2) Finding NetServer from public list
To access NetServer that is registered on public list, you may find it through ‘ NetServer Service’ or
‘Public NetServer List’ menus. Once click ‘ NetServer Service’ or ‘ Public NetServer List’ menu,
you may find ‘ NetServer list of WRS (NetServer Registration Server)’ .
You may search your NetServer with several conditions such as name, model, location, description,
serial number, and IP address. (‘ IP address’ is to be used only when you assigned your NetServer a
fixed IP address)
After finding your NetServer, you may access it by clicking on the name. By clicking on ‘ Preview’ ,
you may monitor real-time image from NetServer without logging in NetServer. However ‘ Preview’
is available only when the NetServer is configured to have its ID and password as default values
‘ guest’ and ‘ guest’ .
(3) Finding NetServer from private list
To access NetServer that is registered on private list, you should make your own NetServer list
before. You may make the list through ‘Searching NetServer’ menu of ‘ NetServer Service’ . In the
list, there are to be registered any NetServer from the ‘ Public List’ or ‘ Private List’ .
My NetServer List: You may maintain your own NetServer registering it on this list. When you
login this homepage, WRS (NetServer Registration Server) detects and shows all the NetServers
that you listed appear on your own list. Therefore you may access any of them without searching it
from WRS (NetServer Registration Service) list nor verifying access token again. So it is very
convenient to have the list when you run several NetServers having dynamic IP addresses.
Search and Append: This menu is to append a certain NetServer on your own list. You may
append NetServer on your own list as follows.
• Key in serial number (W100000000000), MAC address (e.g. 00:00:00:00:00:00), and access
token of a certain NetServer in the box.
• Click ‘ Append’ menu.
• WRS (NetServer Registration Server) search a corresponding NetServer with the conditions
from both the ‘ Public List’ and ‘ Private List’ and registers the NetServer on your own list.