User's Manual

4) Dynamic IP registration service for ISDN and xDSL users
This page is to register NetServer on dynamic IP registration server.
If NetServer is installed on a network of dynamic IP address (floating IP address), administrator
should register the NetServer on dynamic IP registration server to give common users simple
connectivity. If not, no one can access the NetServer through Web browser. It is because that no one
knows IP address which one can access the NetServer with.
To solve the problem, Philips runs a server making a list of NetServers that have dynamic IP
addresses. On the server, NetServer registers its information such as name, location, and description,
so that common users may detect a certain NetServer. Name, location and description are assigned
at ‘ System Configuration’ page. If administrator does not change them, the NetServer will register
default information on the list, and it will be very difficult to point out and access a certain
NetServer. The list is on an Internet homepage of NetServer (www.NetServer.to
).
Note in registering NetServer on WRS
To register your NetServer on WRS, you should enter “DNS Server IP Address” a
t
“Network Configuration” . Though you utilize fixed IP, you should also do it in order to
register yours on WRS. For more detailed information, refer to “Network Configuration” .