User's Manual

2. Configuring Administrator’ s Condition at Homepage
1) System Configuration
This page is to set name, date & time, location, and description of one’ s NetServer. Model, serial
number, and software version appear automatically.
(1) NetServer Name
The name is to be used to register the NetServer on a certain server, if dynamic IP address is used.
Therefore it is very important to set a proper name for user to find the NetServer in the dynamic IP
registration list. (For detailed information, refer to ‘ Dynamic IP Registration Service for ISDN,
xDSL User’ )
(2) Model
By clicking ‘ Detailed H/W Information’ , administrator may view the detailed hardware information
such as maximum numbers of channel, serial port, digital input, digital output, etc. The model name
is marked automatically.
(3) Installation Location & Additional Description
The information is to show in the real time image viewer page as well as in a dynamic IP
registration list.
(4) Date & Time
There are three date & time menus. In “NetServer Current Date & Time” panel, the date and time
that is set in the NetServer appears. In “ System (PC) Current Date & Time” panel, the same date
and time that is set in user’ s PC appears. To synchronize the NetServer and PC date and time, an
administrator can click the “Time Synchronization” button. The “ Manual Date & Time” panel
allows the user to set date and time.
( 5) Administrator’ s E-mail Address
In this panel, administrator records one’ s e-mail address. If administrator put a ‘ contact’ menu of
e-mail communication on real time image viewer page, the linked e-mail address to the ‘ contact’
menu is to be synchronized with this. So administrator can keep up e-mail address easily.
(6) Initialize Flash Info
This will initialize almost all the information saved on Flash Memory. However Date & Time,
Model, Serial Number, and IP configuration of “System Configuration” , and Video Signal Type of
“Video Configuration” menus will not be changed.
* Notice for Time Setting *
After setting time and date manually at the System Configuration of Admin
Menu, please don’ t reboot NetServer-6 within one minute. If you reboot it
within one minute, your setting would not be applied.