User's Manual

(3) Transmission Control
On this viewer, “ Progressive Mode” and “ Channel Rotate Mode On” menus are not available .
Gray Mode
Images are displayed in bla ck and white. Images can be transmitted at a higher speed under gray
mode.
Single Shot Mode
When this button is clicked, one frame of image is reproduced. Therefore, no other images may be
viewed.
(4) Play Control
Pan/Tilt: To move the direction of external camera to where to want to see.
Zoom: To zoom the image in and out.
Focus : To control and optimize the image’ s focus.
Accel. Rate: To control the moving speed of the Pan / Tilt mechanism.
(5) Convenient pop-up menu
‘ Quality Box’ , ‘ Focus Sensitivity’ , and ‘ Image Quality’ menus are not supported.
Image Info
You may decide the color (black or white) of the information that is shown on the left top of the
image. And you may leave out the information.
S ave File As
It is to save a frame of still image as an electric file . A still image can be saved as bitmap (*.bmp)
file or Wavelet format file (*.eye). Wavelet formatted image file is to be reproduced on Internet
browsers such as Netscape Navigator or Internet Explorer as long as the PC is installed Active-X or
Plug-in program. The very image that is shown at the moment when you click the menu is saved.
(6) To Home
This button returns to the default viewer.
(7) Capture
This button is to save a frame of still image transmitted from NetServer. This function is the same
with ‘ Save File As’ menu.
(8) Admin
It is to access administration page. (Refer to Chapter VII ‘ Configuring Administrator’ s
Configuration at Homepage’ )