User's Manual

Quality Box
This is to set a certain area cle ar and remained area dull. You can overcome insufficient network
bandwidth with this function, because the file size is reduced with unfocused area. Quality Box is to
be set like under written description.
• Choose ‘ New QBOX’ button.
• Place mouse cursor on a certain point of real time image where to start QBOX.
• Click and drag the mouse point.
You can also re-use previous QBOX area to focus again by clicking ‘ Enable QBOX’ . ‘ Disable
QBOX’ is to finish. The image activated Focusing Area function is seen in the right. The image
quality of outer area of QBOX is to be set with ‘ Ambient Level’ menu. The level is from 1 to 5. If
you select ‘ Level 1’ , the quality is similar to focused area. And if you select ‘ Level 5’ , the
unfocused area is shown dark. A user who has ‘ Video control’ right may utilize this menu.
Focus sensitivity
You may configure movement degree of zoom mechanism. The sensitivity is from Level 0 to Level
9. By selecting ‘ Level 9’ , user zooms in or out at the largest degree. A user who has ‘ PTZ control’
right may utilize this menu.
Image quality
It is to set image quality. The image quality is from Level 0 to 9. If user chooses the ‘ Level 9’,
NetServer sends the finest image. However, transmission frame rate will be reduced because of
large sized data. If user chooses ‘ Level 0’ , NetServer sends dullest image but fast. A user who has
‘ Video control’ right may utilize this menu.
Save File As
It is to save a frame of still image as an electric file . A still image can be saved as bitmap (*.bmp)
file or Wavelet format file (*.eye). Wavelet formatted image file is to be reproduced on Internet
browsers such as Internet Explorer or Netscape Navigator as long as the PC is installed Active-X or
Plug-in program. The very image that is shown at the moment when you click the menu is saved.
(8) Placing a company logo and hyper-linking
The Philips company logo, located on the left bottom of the viewer, can be replaced with a different
company logo. This logo can then be used as a hyper-link to a company web page. (Refer to
Chapter VII for more detailed information)