User's Manual

III. NetServer Installation Summary, Connection & Placing
1. Installation Summary
• Connect Ethernet and Power to NetServer on local network for configuration.
• Install a setup program of NetServer to a PC on local network.
• Assign an IP address to NetServer and configure administrator’s condition.
• Configure user’s condition.
• Place NetServer for your purpose, and re-connect power and Ethernet.
2. Connecting
• Connect Ethernet line to the Ethernet port in the rear.
• Connect the power supply to a power supply port in the rear.
• Confirm that the LED of the Ethernet port blinks.
IV. Installing NetServer Setup Program
• Copy NetServerSetup.exe file from the enclosed CD (or Diskette).
• Paste the file into your PC.
• Click the file on your PC to activate Setup program.