User's Manual

If you monitor real time video through a CCTV monitor as well as a PC, connect a dome camera to
‘Video Input’ and a monitor to ‘Video Output’. And place the first DIP switch (marked with No. 1)
at lower position ‘OFF’. If the CCTV monitor has a DIP switch and it is configurable the
termination, you may change the termination from the CCTV monitor to NetServer such as the DIP
switch in NetServer ‘ON’ and the DIP switch in a CCTV monitor ‘OFF’. However a CCTV monitor
is generally set as termination of the video signal.