User's Manual

2. Upgrade firmware with upgrading program
(1) Open ‘MS Dos’ window and practice a
command <c:\arp –d>.
(2) Practice upgrading program and select
NetServer that you are going to upgrade
by clicking on IP address or MAC
address in the list. When an IP address
appears in the blanks of ‘Selected IP
address’, key in the administrator’s
password in the blank of
‘Administrator’s password’.
Then click ‘Start’ button.
(3) Click ‘Yes’ button to reboot WeyEye.
( 4) Click ‘OK’ button to start rebooting process.
(5) If NetServer has a firmware of different version,
you are asked whether to replace with new one.
Then confirm it by clicking ‘Yes’
(6) It will be asked if you want to format user file system. If
you maintain current format of NetServer homepage that
you modified, click ‘No’. To use default one, click ‘Yes’.
(7) When upgrading is completed, reboot NetServer by
clicking ‘OK’ button.
(8) If you have another NetServer to upgrade, follow the same process from (1) to (7). If not, quit
the program by clicking ‘Exit’ button.