User's Manual

• Focus on a certain point to register as a preset point controlling PTZ mechanism.
• Click ‘New Preset’ button, then a dialog box ‘New Preset’ appears.
• Select a number from 1 to 64
• Set the preset name.
• Click ‘Add/Change’ button
• In ‘Current Preset List’ panel, you may view preset points that are registered currently. At the
bottom of this window, you may check if the selected number is occupied or not.
New Group
You make a new group with combining registered presets. You may make and list up to 6 groups.
Each group is to contain 64 points. The procedure to make a group is as follows.
• Click ‘New Group’ button, then a dialog box ‘New Group’ appears.
• Select a number from 1 to 6.
• Set the group name.
• Set interval time. This signifies a duration from time when to move to the next preset point to
time when to move to the one after the next preset point. So network is not as good as to
transmit sufficient data for the duration, you had better set sufficient time for you to receive
video data.
• List proper preset point among registered ones in ‘Current Group Member’. According to the
order that you listed in a group, a dome camera travels.
• Click ‘Add/Change’ button
• In ‘Current Group Member’ panel, all registered preset points appear. At the bottom of this
window, you may check if the selected number is occupied or not.