User's Manual

(5) Advanced Configuration
By Clicking ‘Advanced Configuration’, you may access the sub page where to configure the
detailed conditions.
Calibration Parameters
Administrator manipulates screen settings by adjusting brightness, contrast, hue, saturation,
horizontal line shift, and vertical line shift from the menu. With ‘Video Gain’ menu, you may
optimize the image without adjusting each value of other menus. However ‘Video Gain’ is not
supported currently. It is to be supported in near future.
Caption Display Options
Administrator may configure caption on real time image with display options such as color and
contents. Caption is to be made of time information, channel information, and additional
explanation (user defined string).
Visual Setting Parameters
Administrator may configure QBOX and image quality level with aid of real time image. By
placing the mouse curse on real time image and clicking the left button, and you may view pop-up
menus.
• QBOX Parameters : Administrator sets QBOX area with a mouse to ‘click and drag’. Selected
area shows in ‘Left Top Placement’ and ‘Right Bottom Placement’ panels in figures. With
‘Ambient Level’ menu, Administrator may set quality level of unfocused area in the image (out
of the focused range). There are 5 levels. Administrator may set level 5(Darker) to make
unfocused area dark and get the transmission speed up.
• Image Quality Level: Administrator chooses image quality level from 0 to 9. If level 9 is
chosen, NetServer sends the finest image. However, transmission speed will be reduced because
of larger sized data. The image level inside the ‘QBOX’ is the same level as is selected in this
menu.