User's Manual
(5) Access Token
Access token is a password and it is used when you register your own NetServer on a list ‘User’s
NetServer’ out of all NetServers on WRS (NetServer Registration Server). Please refer to Article 5)
‘How to find a registered NetServer in NetServer Internet homepage’ for more detailed information.
5) How to find a registered NetServer in NetServer Internet homepage
On Philips Internet homepage (http://www.Philipsinc.co.kr), there are menus to find NetServer that
is registered on WRS (NetServer Registration Server).
(1) Sign up membership
To search your NetServer out of a public list or a private list, sign up membership first. You may
sign up on the server through ‘Membership’ menu.
(2) Finding NetServer from public list
To access NetServer that is registered on public list, you may find it through ‘NetServer Service’ or
‘Public NetServer List’ menus. Once click ‘NetServer Service’ or ‘Public NetServer List’ menu,
you may find ‘NetServer list of WRS (NetServer Registration Server)’.
You may search your NetServer with several conditions such as name, model, location, description,
serial number, and IP address. (‘IP address’ is to be used only when you assigned your NetServer a
fixed IP address)
After finding your NetServer, you may access it by clicking on the name. By clicking on ‘Preview’,
you may monitor real-time image from NetServer without logging in NetServer. However
‘Preview’ is available only when the NetServer is configured to have its ID and password as default
values ‘guest’ and ‘guest’.
(3) Finding NetServer from private list
To access NetServer that is registered on private list, you should make your own NetServer list
before. You may make the list through ‘Se arching NetServer’ menu of ‘NetServer Service’. In the
list, there are to be registered any NetServer from the ‘Public List’ or ‘Private List’.
My NetServer List: You may maintain your own NetServer registering it on this list. When you
Private List and Access Token
You should set the access token if you configure your NetServer to register its information on a
private list at NetServer Internet homepage (www.NetServer.to). Otherwise you cannot access
the private list nor find the information on your NetServer.
Access token is to be set 9 bytes. 9 bytes are equal to 9 English characters.