User's Manual

1) Image Control
‘Progressive Mode’ image transmission menu is not supported.
(1) Resolution
You may select a resolution level among five. (90x60, 180x121, 360x243, 720x243, 720x486)
(2) Frame Rate
You may choose image transmission speed. (1fps, 3fps, 5fps, 10fps, fastest)
(3) Play Control
If you choose this mode, the images are displayed in black and white. And you can view the images
transmitted faster than in color image.
(4) Single Shot Mode
When this button is clicked, one frame of image is reproduced. Therefore, it is stopped transmitting
further image.
2) PTZ mechanism control
‘Preset’ and ‘Auto Focus’ are not supported.
(1) Pan and Tilt
If you click the buttons, you can move the direction of a dome camera to where you want to see.
(2) Zoom
You may zoom in and zoom out.
(3) Focus
You may control manually to optimize the image’s focus.
(4) Acceleration Rate
You may choose moving speed of Pan/Tilt/Zoom mechanism among three steps of fast, normal and
slow.
3) Pop-up Menu
‘Image Quality’ control, ‘Quality Box’ creation, and ‘Focus Sensitivity’ control are not supported.
(1) Image Info
You may decide the color (black or white) of the information that is shown on the left top of the
image. And you may leave out the information.
(2) Save File As
It is to save a frame of still image as an electric file. A still image can be saved as bitmap (*.bmp)
file or Wavelet format file (*.eye). Wavelet formatted image file is to be reproduced on Internet