User's Manual

user accesses a page where to download Plug-in program.
6) About
User may look up information on software versions clicking ‘Version’ and on trouble shooting
clicking ‘FAQ’ regarding to installation or running NetServer.
4. Real time monitoring through Server Push Viewer
If NetServer is installed on a network where firewall is, you may access NetServer through
server-push viewer to monitor real-time images. If you have information on the network such as
which port is block with firewall, you may access with default viewer by changing Web TCP port or
video TCP port. For changing TCP port, please refer to Chapter VII ‘Configuring Administrator’s
Configuration at Homepage’.
On server-push viewer, some functions such as ‘Progressive Mode’ image transmission, ‘Image
Quality’ control, and ‘Quality Box’ creation menus out of image control and ‘Preset’, ‘Auto Focus’,
and ‘Focus Sensitivity’ control out of PTZ control are not supported. Other functions are same as
that of default viewer.