User's Manual

(1) Image Info
You may decide the color (black or white) of the information that is shown on the left top of the
image. And you may leave out the information.
(2) Quality Box
This is to set a certain area clear and remained area dull. You can overcome insufficient network
bandwidth with this function, because the file size is reduced with unfocused area. Quality Box is to
be set like under written description.
• Choose ‘New QBOX’ button.
• Place mouse cursor on a certain point of real time image where to start QBOX.
• Click and drag the mouse point.
You can also re-use previous QBOX area to focus again by clicking ‘Enable QBOX’. ‘Disable
QBOX’ is to finish. The image activated Focusing Area function is seen in the right. The image
quality of outer area of QBOX is to be set with ‘Ambient Level’ menu. The level is from 1 to 5. If
you select ‘Level 1’, the quality is similar to focused area. And if you select ‘Level 5’, the
unfocused area is shown dark. A user who has ‘Video control’ right may utilize this menu.
(3) Focus sensitivity
You may configure movement degree of zoom mechanism. The sensitivity is from Level 0 to Level
9. By selecting ‘Level 9’, user zooms in or out at the largest degree. A user who has ‘PTZ control’
right may utilize this menu.
(4) Image quality
It is to set image quality. The image quality is from Level 0 to 9. If user chooses the ‘Level 9’,
NetServer sends the finest image. However, transmission frame rate will be reduced because of
large sized data. If user chooses ‘Level 0’, NetServer sends dullest image but fast. A user who has
‘Video control’ right may utilize this menu.
(5) Save File As
It is to save a frame of still image as an electric file. A still image can be saved as bitmap (*.bmp)
file or Wavelet format file (*.eye). Wavelet formatted image file is to be reproduced on Internet
browsers such as Netscape Navigator or Internet Explorer as long as the PC is installed Active-X or
Plug-in program. The very image that is shown at the moment when you click the menu is saved.
4) Administrator’s page access
Clicking ‘Goto Admin Page’ menu, you go to a login page of administration page. However only
the user who has authority as an administrator can access the page with administrator’s ID and
password.
5) Program download
As NetServer compresses image with Wavelet algorithm, user needs to install Plug-in program to
see transmitted image through Netscape Navigator on one’s PC. Clicking ‘Netscape Plugin’ menu, a