User's Manual

3. Real time monitoring through Default Viewer
At default viewer, a user may configure image transmission method and control integrated PTZ
mechanism of a dome camera. The PTZ control panel is activated in some seconds depending on
network speed.
On the left side panel, there are menus for changing real time image viewer, accessing
administration page, downloading Plug-in program, viewing information on version, and FAQ.
• 720x486 Viewer: By selecting this viewer, a user monitor images of 720 by 486 resolutions.
This viewer has the identically same functions of default viewer but the image panel is bigger by
4 times than that of default viewer.
• Server Push Viewer: If NetServer-1or user’s PC is behind firewall on network, a user may
monitor real time image through ‘Server Push Viewer’. Some functions such as ‘Progressive
Mode’ image transmission, ‘Image Quality’ control, and ‘Quality Box’ creation menus out of
image control and ‘Preset’, ‘Auto Focus’, and ‘Focus Sensitivity’ control out of PTZ control are
not supported in this viewer.
1) Image control
There are five menus for controlling image transmission method.