User's Manual

2. Assigning IP address and Configuring administrator’s condition with Setup program
1) Starting Setup Program for NetServer-1
Click the “NetServerSetup.exe” file
on your PC. When the Setup
Program is executed, the setup
program detects and shows every
NetServer connected on the local
network.
From the NetServers listed, select
one to assign a new IP address.
(Default is 211.53.133.92) To choose
a NetServer, click on its MAC
Address or IP addres
When a NetServer is selected, its IP
address will appear in the ‘Selected
IP Address’ box. Type a password in
the “Admin’s Password” box to
change the IP address, reboot
NetServer, or start configuration.
The default password is “admin”.