Specification

10VA Pure Sine Wave Output Nano Inverter
Automatic Output Voltage Select
Regulates AC Dimming Drivers to 10VA
Specifications
UL Listed for US and Canada
Listed to UL924 and tested to CSA 22.2, No. 141
For Field or Factory Installation (Indoor and Damp)
Maximum Output Power
10VA into load
Total Connected Output Load,
Dimmable lighting loads
Input power 50W maximum with most
LED drivers and fluorescent ballasts
(consult factory for driver compatibility)
Non-dimmable lighting loads
Input power 10VA maximum
Illumination Time
90 Minutes
AC Input Voltage and Current (charging only)
120 through 277VAC, 50/60 Hz, 80 mA
Recharge Time
24 Hours
Charging Indicator Light / Test Switch
Integrated LED Test Switch
Battery
Maintenance-Free Li-ion Battery
Output Voltage, Automatically Selected
120 VAC +/- 10%, or 277 VAC +/- 10%
Output Frequency
60 Hz, ± 5%
Temperature Rating (Ambient)
32° F to 122° F (0° C to 50° C)
Dimensions
15.34" L x 2.25" W x 1.16" H
(390mm x 58mm x 30mm)
Mount center - 15.0" (381mm)
Weight
3.45 lbs. (1.56kg)
Warranty
5 years (NOT pro-rata)
Benefits:
• Constant 10VA output power
• Automatic output voltage select
• Works with LED and fluorescent luminaires
• Compatible with Type B TLED and screw based lamps (up to 10VA)
• Ideally compatible with single and multi-channel LED dimming drivers
• Complies with Part 15 of the FCC (Federal Communications Commission) Rules
• Meets California Energy Commission Title 20 efficiency requirements
• Remote-mounting up to 250 feet maximum
15.0"
2.25"
1.16"
1.37"
15.34"
ELI-S-10.spec.L8000044 www.bodine.com 09/19 page 1 of 2
Project:
Location:
Cat.No:
Type:
Lamps: Qty:
Notes:
Emergency Backup
Nano Inverter
ELI-S-10
15.0"
2.25"
1.16"
1.37"
15.34"
Dimensions
15.34" x 2.25" x 1.16" (mounting center - 15.0")
Product order number: 12 NC number:
ELIS10
ELIS10C (for model with conduit)
ELIS10CDF (for model with conduit and dual flex)
913702471101
913702471301
913702471401