Cut Sheet

Metal
Halide
Lamp Ballast
Catalog Number 71A5770
For 250W M58
60 Hz CWA
Status: Active
DIMENSIONS AND DATA
1.30"
6.50"
5.75"
B
MAX.
A
0.7"
0.30" WIDE
2 SLOTS
4 1/4 X 4 3/4 CORE - 2 COIL UNIT
3.90"
4.75"
4.40"
4.40"4.25"
4 HOLES
CLEARED
FOR #10
THRU-BOLTS
Capacitor: 7C150P40-R
Capacitance: 15
Dia/Oval Dim: 1.75
Height: 3.75
Temp Rating: 105°C
This ballast does not
require the use of an ignitor.
Ignitor: NA
Data is based upon tests performed by Advance Transformer in a controlled environment and representitive of relative performance.
Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ADVANCE
O'HARE INTERNATIONAL CENTER · 10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Customer Support/Technical Service: Phone: [phone] · Fax: [phone]
Corporate Offices: Phone: [phone]
INPUT VOLTS 120 208 240 277
CIRCUIT TYPE
POWER FACTOR (min)
REGULATION
Line Volts
Lamp Watts
LINE CURRENT (Amps)
Operating................................................... 2.50 1.45 1.25 1.10
Open Circuit............................................... 1.70 1.00 0.85 0.75
Starting...................................................... 2.20 1.30 1.10 1.00
UL TEMPERATURE RATINGS
Insulation Class
Coil Temperature Code B B B B
MIN. AMBIENT STARTING TEMP.
NOM. OPEN CIRCUIT VOLTAGE
INPUT VOLTAGE AT LAMP DROPOUT........................... 60 104 120 138
INPUT WATTS
RECOMMENDED FUSE (Amps)..................................... 8 5 5 3
CORE and COIL
Dimension (A)
Dimension (B)
Weight (lbs.)
Lead Lengths
CAPACITOR REQUIREMENT
Microfarads
Volts (min.)
Fault Current Withstand (amps)
60 Hz TEST PROCEDURES (Refer to Advance Test
Procedure for HID Ballasts - Form 1270)
High Potential Test (Volts)
1 minute
2 seconds
Open Circuit Voltage Test (Volts)
Short-Circuit Current Test (Amps)
Secondary Current
Input Current.............................................. 1.90 1.10 0.95 0.80 -
2.70 1.70 1.35 1.20
CWA
90%
±10%
±10%
H(180°C)
1029
-20°F or -30°C
300
298
1.60
3.15
8
TERM"
15.0
400
2000
2500
270-330
2.25-2.75
Wiring Diagram:
Fig. A
LAMP
LAMP
LINE V
COM COM
LINE V
LINE V
LINE V
CAP
CAP
Typical Ordering Information
(please call Advance for suffix availability)
Order Suffix Description
510D Ballast w/Welded Bracket & Dry Film Capacitor
600 Ballast Only, No Capacitor
610 Ballast with Welded Bracket, No Capacitor
10/19/04