User Instructions
NO
.
Name Def. Valid Description
Differential
percent Report
0 means turn off this function.
The unit is percentage.
Enable this function the device will detect
every percentage.
And when the lightSensor is over 10
percentage, it will continue report.
18
TVOC
Differential
percent Report
10 1~100%
The TVOC Differential to report.
0 means turn off this function.
The unit is percentage.
Enable this function the device will detect
every percentage.
And when the lightSensor is over 10
percentage, it will continue report.
Z-Wave Supported Command Class
Command Class Version Required Security Class
Z-Wave Plus Info
2 None
Version
3 Highest granted Security Class
Manufacturer Specific
2 Highest granted Security Class
Security 2
1 None
Device Reset Locally
1 Highest granted Security Class
Association
2 Highest granted Security Class
Association Group Information
1 Highest granted Security Class
Powerlevel
1 Highest granted Security Class
Basic
1 Highest granted Security Class
Configuration
1 Highest granted Security Class
Notification
8 Highest granted Security Class
Firmware Update Meta Data
4 Highest granted Security Class
Supervision
1 None
Transport Service
2 None
Sensor multilevel 11 Highest granted Security Class
Over The Air (OTA) Firmware Update
The device supports Z-Wave firmware update via OTA.
Before starting the update, please remove the front case of the device otherwise the
hardware check will fail.
Let the controller into firmware update mode, and press the front tamper key once to
start the update.
After firmware download is completed, the LED light will flash intermittently.
Overview
5