User's Manual

2.
Dimmer Control
When long pressing button, the PAD06 will control the brightness of
dimmable light bulb.
3.
Join network
When pressed and released button three in 2 seconds, the PAD06 will do
finding and joining network.
4.
Reset to default / Leave network
Pressed the button three times in two seconds, and do not release the
button in the 4
th
pressed without 5 seconds, the PAD06 will do reset to
default.
* LED Function
1.
Relay Status
If the relay is on, the device will turn the LED on.
If the relay is off, the device will turn the LED off.
2.
Reset to default / Leave network
When PAD06 reset to default / leave network the relay will turn on.
3.
Try joining network
Power on the device, if PAD06 doesn't join network, the device will auto
start the try joining network mode. The LED will light on one second.
Programming
* Zigbee Cluster Library Description
The PAD06 support Profile Home Automation v1.2 (profile is is 0x0104).
The device is hosted in endpoint 1 (0x01).
* Supported Clusters List
Cluster ID Cluster Name
0x0000 Basic
0x0004 Group
0x0005 Scenes
0x0006 ON/OFF
0x0008 Level Control
* Basic Cluster (Cluster ID :0x0000)
Attribute ID Attribute Name Attribute Type Default Value
0x0500 Model identifier CHAR
2