Data Sheet

PSM10R Characteristics
1
WWW.PHIHONG.COM
INPUT:
Input Voltage Rating
100 to 240VAC
AC Input Voltage Range
90 to 264VAC
AC Input Current
0.5A (RMS), 115VAC at maximum load
0.25A (RMS), 230VAC at maximum load
AC Input Frequency
47 to 63Hz
In-rush Current
30A for 120VAC at maximum load
60A for 240VAC at maximum load
(cold start at ambient 25°C)
Leakage Current
0.25mA max at 264VAC/50Hz
OUTPUT
Output Power
10W
Efficiency
2
DoE Level VI
ErP 2009/125/EC (EU 2019/1782)
Hold up time
10mS min @115VAC/60Hz, max load
ENVIRONMENTAL
Temperature
Operation 0°C to +40°C
Non-operation -40°C to +85°C
Humidity 10 to 90%
EMI
Complies with FCC Class B
Complies with EN55032 Class B
Immunity
EN61000-4-2 Level 3
EN61000-4-3 Level 2
EN61000-4-4 Level 2
EN61000-4-5 Level 2
EN61000-4-6 Level 3
EN61000-4-11
EN61000-4-12
EN61000-3-2 Class A
EN61000-3-3
Isolation (HI-POT test)
Pri. to Sec. 3000VAC for 1 minute, 10mA
Insulation Resistance
>50M ohm 500VDC
FEATURES:
Over Current Protection
Short Circuit Auto-restart
Short Circuit Protection
Output can be shorted without damage
Over Voltage Protection
10VDC max at full load
Dielectric Withstand (Hi-pot) Test
Pri. to Sec.: 3000V AC for 1 min., 10mA
DC Cord
1200mm (20 AWG for barrel connector,
22AWG for Micro B connector)
AC Input clips (sold separately):
RPA – US
RPB – Brazil
RPC – China
RPE – Europe
RPH – Korea
RPI – India
RPK – UK
RPN – Argentina
RPS – Australia
RPX – IEC320 C8
Notes:
1. The characteristics defined are at ambient temperature of 25ºC unless otherwise specified
2. Efficiency is measured after 30 minutes burn-in