Data Sheet

Revision 1/13/2020
INPUT:
AC Input Voltage Rating
100 to 240VAC
AC Input Voltage Range
90 to 264VAC
AC Input Current
0.8A (RMS) maximum at 120VAC
0.55A (RMS) maximum at 240VAC
AC Input Frequency
47 to 63Hz
Leakage Current
3.5mA max
Max In-rush Current
60A max at 240VAC and max load (Cold
Start at ambient 25°C)
OUTPUT:
Output Power
30W
Hold up Time
10mSec min at max load at 120VAC, 60Hz
Efficiency
2
80% Typical at max load at 120VAC, 60Hz
ENVIRONMENTAL:
Temperature
Operating -20°C to +50°C
Non-operating -20°C to +70°C
Relative Humidity 5 to 90%
EMI
Complies with EN55032 Class B
Complies with FCC part 15 Class B
EMC
ESD: IEC61000-4-2 , Level 3
RS: IEC61000-4-3, Level 3
EFT/Burst: IEC61000-4-4, Level 2
Surge: IEC61000-4-5, Level 3
CS: IEC61000-4-6 , Level 3
Voltage Dips: IEC61000-4-11
Harmonic: IEC61000-3-2, Class A
Isolation (HI-POT)
Primary to secondary: 1500VAC for 1
minute, 10mA
Insulation Resistance
Primary to secondary: 10M Ohm 500VDC
FEATURES:
OCP/OVP/Short Circuit Protection
OCP: ≤750mA Max
OVP: Latching
Short Circuit: The output can be shorted
permanently without damage. Non-latching
auto recovery.
Indicator
Solid Green: unit has detected a
IEEE802.3at or af load/PD
Blinking Green: Power “ON” ready for
connection
Fast Blinking Amber/Green: Invalid load
connected
Slow Blinking Amber/Green: fault
AC Input Connector
IEC320 C14 - three wire
Output Connection
+pins 3,6 / -pins 1,2
Data IN/POE OUT Connector
Shielded RJ45
POE29U-1AT(PL)D-R Characteristics
1
WWW.PHIHONG.COM
Notes:
1. The characteristics defined are at ambient temperature of 25ºC unless otherwise specified
2. Efficiency is measured after 30minutes burn-in