Datasheet

POE20U-560(G) Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Range
90 to 264V AC
AC Input Voltage Rating
100 to 240V AC
AC Input Current
0.75A (RMS) maximum for 90V AC
0.45A (RMS) maximum for 240V AC
Leakage Current
1.0mA maximum at 254V AC, 50Hz
AC Input Frequency
47 to 63Hz
AC Inrush Current
15A (RMS) maximum for 115V AC
20A (RMS) maximum for 230V AC
OUTPUT:
Total Output Power
19.6W at 56V DC
Efficiency
65% at maximum load, and 120V AC 60Hz
Hold-up Time
16mS minimum at 120V AC and maximum load
Transient O/P Voltage Protection
60V maximum at switch on/off at any AC line
phase
ENVIRONMENTAL:
Temperature
Operation 0 to +40°C
Non-Operation -25 to +65°C
Humidity 10 to 90%
EMC
FCC Part 15 Class B
EN55022 Class B
Isolation Test
Primary to Secondary: 4242V DC for 1 minute
10mA
Primary to Field Ground: 2121V DC for 1 minute
Output to Field Ground: 2121V DC
Immunity
ESD: EN61000-4-2 Level 3
RS: EN61000-4-3 Level 2
EFT: EN61000-4-4 Level 2
Surge EN61000-4-5 Level 3
CS: EN61000-4-6 Level 2
Voltage Dips EN61000-4-11
Harmonic: EN61000-3-2 Class A
Insulation Resistance
Primary to Secondary: >10M OHM 500V DC
Primary to Field Ground: >10M OHM 500V DC
FEATURE:
Over Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and
overload protection as per 802.3af specifications
The output can be shorted permanently without
damage.
Indicators
Green LED 1: Input power “ON”
Red LED: Fault detected
Green LED 2: Valid IEEE802.3af load detected and
connected
Input Connector
IEC320 inlet 3 pin
Warranty
1 Year
Dimension Diagram Unit: mm (inch)