Data Sheet

Revision 12/10/2018
POE16R-1AFG-R Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Range
90 to 264VAC
AC Input Voltage Rating
100 to 240VAC
AC Input Current
0.8A (RMS) max for 90VAC
0.5A (RMS) max for 240VAC
Leakage Current
0.25mA max @ 254VAC 60Hz
AC Input Frequency
47-63Hz
AC Inrush Current
15A (RMS) max for 115VAC
20A (RMS) max for 230VAC
OUTPUT:
Total Output Power
15.4W
Ripple and Regulation
150mV max
Efficiency
75% (typical) at max load, 120VAC 60Hz
Transient O/P Voltage Protection
60V max at switch on/off,any AC line phase
Hold-up time:
16mS min at max load and 120VAC, 60Hz
ENVIRONMENTAL:
Temperature
Operation 0 to +40°C
Non-operation -25 to +65°C
Humidity 5 to 90%
EMC
Complies with FCC Class B
Complies with EN55032 Class B
Immunity EN50082-1
ESD: EN61000-4-2. Level 3
RS: EN61000-4-3. Level 2
EFT: EN61000-4-4. Level 2
Surge: EN61000-4-5. Level 3
CS: EN61000-4-6. Level 2
Voltage Dips EN61000-4-11
Harmonic: EN61000-3-2 Class A
Isolation Test
Primary to Secondary: 3000VAC for 1 second
10mA
Insulation Resistance
Primary to Secondary: >10M OHM 500VDC
FEATURES:
Over Voltage/Current, Short Circuit
Protection
The output is equipped with short circuit
protection and overload protection as per
IEEE802.3af specifications and conforms to
UL60950-2. The output can be shorted
permanently without damage.
Hold-up Time
16mS min. 120VAC and max load
Indicator
Solid Green: Valid IEEE802.3af load detected
and connected “ON”
Blinking Green/Red: Invalid load connected
Solid LED: Fault detected
Data in/Output Connector
RJ45
Output Connection (Standard Model)
+pin 4,5 / -pins 7,8