Data Sheet

ManualsBrandsPhihong ManualsComputing & OfficePhihong POE15M-1AF PoE injector IEEE 802.3af (12.95 W)

Revision 1/11/2019

PHIHONG USA

WWW.PHIHONG.COM

15.4W Single Port Power-over-Ethernet

IEEE802.3af Compliant Power Injector

Features

• Compliant with IEEE802.3af Standard

• Gigabit data rates

• Non-Vented Case

• Full Protection OCP, OVP

• Small case size

• Low Cost

• 1 Year Warranty

Applications

• IP Telephones

• Security Cameras

• Wireless Network Access Points

Safety Approvals

• cUL/UL 60950-1

• IEC/EN 60950-1

• CE

• LPS

Mechanical Characteristics

• Length: 106mm (4.17in)

• Height: 27mm (1.1in)

• Width: 40mm (1.57in)

• Weight: 100g (3.5oz.)

Output Specifications

Model

Data Speed

Output

Voltage

Load

Regulation

Ripple & Noise

p-p(max)

Min

Max

Line

Load

POE15M-1AF-R

56V

10mA

0.275A

54-57V

200mV

POE15M-1AFE-R

56V

10mA

0.275A

54-57V

200mV

POE15M-1AFE-2-R

2.5G

56V

10mA

0.275A

54-57V

200mV

Notes: 1. Measured with by-pass capacitors 0.1uf/10uf at output connector terminal anf oscilloscope set at 20Mhz(tested by oscilloscope).

2. Shielded RJ45

Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for

the most up-to-date specifications and contact information.

Summary of content (4 pages)

PAGE 1
PHIHONG USA WWW.PHIHONG.COM 15.4W Single Port Power-over-Ethernet IEEE802.3af Compliant Power Injector Features • Compliant with IEEE802.3af Standard • Non-Vented Case • Small case size • 1 Year Warranty Applications • IP Telephones • Wireless Network Access Points Safety Approvals • cUL/UL 60950-1 • IEC/EN 60950-1 Mechanical Characteristics • Length: 106mm (4.17in) • Width: 40mm (1.
PAGE 2
POE15M-1AF Characteristics INPUT: AC Input Voltage Range 90 to 264VAC WWW.PHIHONG.COM Isolation Test Primary to Secondary: 3000VAC for 1 second 10mA AC Input Voltage Rating 100 to 240VAC Insulation Resistance Primary to Secondary: >10M OHM 500VDC AC Input Current 0.55A (RMS) max for 90VAC 0.35A (RMS) max for 240VAC FEATURES: Over Voltage Protection Conforms to UL60950-1 Leakage Current 0.
PAGE 3
Dimension Diagram Unit: mm WWW.PHIHONG.
PAGE 4
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Phihong USA Corporation 47800 Fremont Boulevard Fremont, CA 94538 Telephone: (510) 445-0100 www.phihong.com NOTE: This model has/The models in this products series have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.