Data Sheet

3/8/2018 2.5A Stepper Phidget - STC1001_0 at Phidgets
https://www.phidgets.com/?tier=3&catid=64&pcid=57&prodid=1014 2/3
The Phidget Control Panel is available for use on both macOS and Windows machines. If you would like to follow along, first take
a look at the getting started guide for your operating system:
Getting started with Windows
Getting started with macOS
Linux users can follow the getting started with Linux guide and continue reading here for more information about the STC1001.
First Look
After plugging the STC1001 into your computer and opening the Phidget Control Panel, you will see something like this:
The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:
Serial number: allows you to differentiate between similar Phidgets.
Channel: allows you to differentiate between similar objects on a Phidget.
Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware
is out of date. Update the firmware by double-clicking the entry.
The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.
Stepper Motor
Double-click on the Stepper object, labelled Stepper Phidget, in order to run the example: