Data Sheet
6/29/2019 Wireless VINT Hub - HUB5000_0 at Phidgets
https://www.phidgets.com/?tier=3&catid=2&pcid=1&prodid=1143 11/12
Using Your Own Program
You are now ready to start writing your own code for the device. The best way to do that is to start from our examples:
The the HUB5000 can be used by itself with the DigitalInput Examples, the DigitalOutput Examples, the VoltageInput Examples, and
the VoltageRatioInput Examples. To nd examples for a Phidget connected to the HUB5000, look at its User Guide for more
information.
Once you have your example, you will need to follow the instructions on the page for your programming language to get it running. To
nd these instructions, select your programming language from the Programming Languages page.
Technical Details
Upgrading the Firmware
You can download the most recent HUB5000 rmware binary here:
HUB5000 Firmware
To upgrade the rmware, go into the web conguration page as outlined in the getting started section of this page. From there, click
on "System", and upload this le by click on "select le" under the "Upgrade Firmware" section. After that, click on "Upgrade and
Restart". You'll be instructed to wait a few minutes before logging back in to the web interface. When you do, you can conrm that the
new version has successfully installed by checking to see if the rmware version listed in the "Status" section matches the rst three
numbers in the rmware le name that you downloaded. You can also check the version in the "Network Phidgets" tab on the Phidget
Control Panel.
VINT Ports
For more information on the capabilities of the ports on the VINT Hub, see the VINT Primer.
Conguration Page
Conguration using the Phidget Control Panel
To get to the HUB5000's conguration page, open the Phidget Control Panel and nd it under the "Network Phidgets" tab as outlined in
the getting started section of this page.
Conguration using Phone
TO TOP