Product manual

9
1130_0_Product_Manual - March 26, 2010 8:07 AM
Analog Input Cable Connectors
Each Analog Input uses a 3-pin, 0.100 inch pitch locking connector.
Pictured here is a plug with the connections labeled. The connectors
are commonly available - refer to the Table below for manufacturer part
numbers.
Cable Connectors
Manufacturer Part Number Description
Molex 50-57-9403 3 Position Cable Connector
Molex 16-02-0102 Wire Crimp Insert for Cable Connector
Molex 70543-0002 3 Position Vertical PCB Connector
Molex 70553-0002 3 Position Right-Angle PCB Connector (Gold)
Molex 70553-0037 3 Position Right-Angle PCB Connector (Tin)
Molex 15-91-2035 3 Position Right-Angle PCB Connector - Surface Mount
Note: Most of the above components can be bought at www.digikey.com
Mechanical Drawing
1:1 scale