Product manual

6
1130_0_Product_Manual - March 26, 2010 8:07 AM
Double Click on the icon to activate the
Phidget Control Panel and make sure that the
Phidget InterfaceKit 8/8/8 is properly
attached to your PC.
Double Click on Phidget InterfaceKit 1.
8/8/8 in the Phidget Control Panel
to bring up InterfaceKit-full and
check that the box labelled Attached
contains the word True.
Make sure that the Ratiometric box 2.
is NOT Ticked.
View the unconverted pH value 3.
inside the Analog In boxes. At a pH
level of 7 or with a neutral ORP, the
SensorValue will be 500.
You can adjust the input sensitivity 4.
by moving the slider pointer.
Click on the Sensors button to bring 5.
up the Advanced Sensor Form.
1
2
3
4
5
In the Sensor 6 box, select the 1130 - pH 1.
Adapter (pH) from the drop down menu.
Alternatively, if you are using an ORP
electrode, choose 1130 - pH Adapter (ORP).
The pH level measured by the sensor is 2.
shown here.
Formula used to convert the analog input 3.
SensorValue into pH (or ORP).
1
2
3