Product manual

6
1129_0_Product_Manual - November 5, 2009 2:13 PM
Double Click on the icon to activate the
Phidget Control Panel and make sure that the
Phidget InterfaceKit 8/8/8 is properly
attached to your PC.
In the Sensor 6 box, select the 1129 - Touch 1.
Sensor from the drop down menu.
The sensor touch state is shown here.2.
Formula used to convert the analog input 3.
SensorValue into a touch state.
1
2
3
Double Click on Phidget 1.
InterfaceKit 8/8/8 in the Phidget
Control Panel to bring up
InterfaceKit-full and check that the
box labelled Attached contains the
word True.
Make sure that the Ratiometric box 2.
is Ticked.
Touch the back of the Sensor 3.
Board. When you touch anywhere
ontheatsurface,thevalueinthe
Analog In box goes to 1000 (or
very close to it). It goes back to 0
when you stop touching it.
You can adjust the input sensitivity 4.
by moving the slider pointer.
Click on the Sensors button to bring up the Advanced Sensor Form.5.
1
2
3
4
5