Data Sheet

RB-Phi-179

PhidgetStepper Bipolar Stepper Motor Controller

Description

The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of

one bipolar stepper motor. The 1067 can be used in applications that require very precise positioning;

This is also the product you want to use to control larger industrial steppers or for applications that need

a lot of torque. This board is USB isolated, protecting your system from ground loops, and comes with a

built-in replacable ATP Blade Terminal fuse to protect against an over-current scenario.

Specifications

Controller Properties

 Motor Type: Bipolar Stepper

 Number of Motor Ports: 1

 Motor Position Resolution: 1⁄16 Step (40-Bit Signed)

 Position Max: ± 1E+15 1/16 steps

 Stepper Velocity Resolution: 1 1/16 steps/sec

 Stepper Velocity Max: 250000 1/16 steps/sec

 Stepper Acceleration Resolution: 1 1/16 steps/sec²

 Stepper Acceleration Min: 2 1/16 steps/sec²

PAGE 1
RB-Phi-179 PhidgetStepper Bipolar Stepper Motor Controller Description The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. The 1067 can be used in applications that require very precise positioning; This is also the product you want to use to control larger industrial steppers or for applications that need a lot of torque.
PAGE 2
 Stepper Acceleration Max: 1E+07 1/16 steps/sec² Electrical Properties      Available Current per Coil Max: 4 A Supply Voltage Min: 10 V DC Supply Voltage Max: 30 V DC Current Consumption Min: 25 mA USB Speed: Full Speed Physical Properties      Power Jack: 5.5 x 2.