Manual
Table Of Contents
- Product Features
- Installing the hardware
- Downloading and Installing the software
- Programming a Phidget
- Technical Section
- The PhidgetAdvancedServo software component uses degrees to specify position, velocity, and acceleration. The degree unit is translated into a pulse sent to the servo, but it’s up to the servo to translate this signal into a particular position. This translation varies between servo models and manufacturers so our degree abstraction will not be exactly the same as the servo you are using. Our degree abstraction is based on the HS322-HD servo, which is typically 10.4uS per degree.
- API Section
- We document API calls specific to the 1066. Functions common to all Phidgets are not covered here. This documentation is deliberately generic. For calling conventions in a specific language, refer to that language’s API manual.
- Device Specifications
- Mechanical Drawing
- Product History
1066_0_Product_Manual created: 07/09/09 Page 2
Installing the hardware
Connect the RC servo Motor to the PhidgetAdvancedServo 1-Motor.1.
Connect the PhidgetAdvancedServo 1-Motor to your computer using the USB cable.2.
The kit contains:
A PhidgetAdvancedServo 1-Motor•
A USB Cable•
You will also need:
An RC Servo Motor•
1
2