Datasheet

RB-Phi-103

Phidgets 4 Channel USB to Analog Output

The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to

+-20mA. An error will be reported when this current is exceeded, and the voltage the customer is

getting is no longer accurate. The voltage is produced with 12 bit resolution (4.8mV).

The board is not isolated and all 4 channels share a common ground.

All the power is supplied by the USB bus.

Product Specifications

Characteristic Value

Output Voltage Range ±10V

Current limit per channel 20mA

Output Voltage Resolution 4.8mV (12 bit)

Output Impedance (channel

enabled)

0.5 Ohm

Output Impedance (channel

not enabled)

4k Ohms

USB Voltage Range 4.5-5.25VDC

USB Max Current 300mA

USB Quiescent Current 55mA

Capacitive Load Stability 4000 pF

Terminal Block min/max

wire gauge

16-26 AWG

Isolation

Not Isolated: all channels

share common ground

Operating Temperature 0 - 70°C

PAGE 1
RB-Phi-103 Phidgets 4 Channel USB to Analog Output The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will be reported when this current is exceeded, and the voltage the customer is getting is no longer accurate. The voltage is produced with 12 bit resolution (4.8mV). The board is not isolated and all 4 channels share a common ground. All the power is supplied by the USB bus.
PAGE 2
Product Features • Produces a set voltage from -10V to +10V • Current up to ±20mA per channel • You can connect up to 4 devices • Can be used to control LED and Fluorescent Dimmers, Valve Actuators, Motor Controls.