User manual

32
Note
If you set Management IP as 255.255.255.255, all devices from the
network can remotely manage your router.
3. Click Save to save the settings.
To access the router from internet, type the router's WAN IP into the address bar of a
browser, followed by a colon (:) and the port number. For example, if the WAN IP is
211.117.154.79, and the port number you set is 8181, enter http:// 211.117.154.79:8181 to
manage the router via internet.
WARNING!
Turn off Remote Access if it is not used to avoid potential hazard from
internet.
6.9 Wireless Extension
By using the Wireless Extension, the main and the sub routers can be bridged to extend
coverage of the wireless network. The wireless network to be extended can be achieved
by auto-scanning (recommended) or specifying a network manually.
To enable Wireless Extension, follow these steps below:
1. On Web Management, go to Main menu > Advanced > Wireless Extension and
toggle on Wireless Extension switch.
WISP mode supports automatic scan and manual input.