User manual

25
6 Advanced settings
6.1 DHCP service
By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The
router assigns IP, DNS server, and default gateway addresses to all computers connected
to the LAN and WLAN.
To enable DHCP server, follow these steps below:
1. On Web Management, go to Main menu > Advanced > DHCP and toggle on
DHCP switch.
2. Specify the IP Address Pool for the clients on your network.
3. Click Save to save the settings
You can also specify a reserved IP address for a computer on the LAN, and bind the IP
Address and MAC Address into a pair, so that the computer always receives the same IP
address each time it accesses the router’s DHCP server.
6.2 Guest WiFi
Guest WiFi is a type of small local network designed for temporary visitors. You can give
the guest access to your internet connection without sharing your WiFi password and the
devices connected to the guest network will not be able to access the share files inside