User manual

23
Channel
Channel determines which operating frequency will be used. If you
notice a severe interference problems with another nearby access
point, you may try to manually select a fixed channel. Otherwise you
can leave it as Auto.
Bandwidth
Different WiFi mode has different bandwidth. Normally a higher
bandwidth provides faster network speed, but it will be much easier
interfered by other radio signal. The default value is recommended.
AP Isolation
If enabled, the devices under this SSID can only access Internet and
it cannot communicate with other devices in the same WiFi network.
Click Save to save the settings.
5.3 WAN settings
To configure WAN settings, go to Main menu > Advanced > Internet Settings on Web
Management.
For Connection Type, refer to Section 4.2.
Click Expand to have more advanced settings displayed.
MTU MTU defines the maximum length of your data packet.
 DHCP: The range of maximum length is between 576 and
1500. 1500 is the default value.
 PPPoE: The range of maximum length is between 576 and
1492. 1480 is the default value.