User manual

14
router.
2. Connect your modem to the WAN port on the router using a RJ-45 cable.
Note
 Make sure your modem has proper Internet connection.
 If you have a wired ethernet connection to Internet instead of a
modem, connect RJ-45 cable directly to the WAN port on the
router, and turn on the router, then continue with the following
instructions to complete the router setup.
3. Connect your device to the router (wired or wireless):
Wired: Connect your PC to the LAN port on the router with a RJ-45 cable.
Wireless: Turn on WLAN on your wireless device and connect to@PHICOMM_XX or
@PHICOMM_XX_5G.
XX represents the last two digits of router’s MAC address that can be found on the
label at
the bottom of your router.