Operation Manual

Copyright @ 2014 Phicomm Europe GmbH – print only for private use!
page 6 of 49
GENERAL PRECAUTIONS
AVOID APPLYING EXCESSIVE PRESSURE TO THE DEVICE
Do not apply excessive pressure on the device to prevent damaging them.
DEVICE IS GETTING WARM AFTER PROLONGED USE
When using your device for prolonged periods the device may become warm. In most
cases this condition is normal and therefore should not be interpreted as a problem with
the device.
HEED SERVICE MARKING
Except as explained in the user manual, do not repair any product yourself. Service
needed on components inside the device should be done by an authorized service outlet
or provider.
PHICOMM is entitled to use new or reconditioned replacements parts or boards for
repairs under warranty, provided they have the same functionality as the parts to be
replaced.
DAMAGE REQUIRING SERVICE
Unplug the device from the electrical outlet and refer servicing to an authorized service
center or provider under the following conditions:
• Liquid has been spilled or an object has fallen onto the product.
• The product has to been exposed to rain or water.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the operating instructions.
AVOID HOT AREAS
The product should be placed away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that products heat.
AVOID HOT AREAS
Never use the product in a wet location.
AVOID USING YOUR DEVICE AFTER A DRAMATIC CHANGE IN TEMPERATURE
When you move your device between environments with very different temperature
and/or humidity ranges, condensation may form on or within the device. To avoid
damaging the device, allow sufficient time for the moisture to evaporate before using
the device.